Contractor Management · Chemical Manufacturing & COMAH
Contractor Management for chemical manufacturing & comah sites.
Induction verification and access gating that keep un-inducted contractors out of restricted zones automatically. Purpose-built for the regulatory and operational realities of chemical manufacturing & comah.
The Salvus Network ties every worker's safety tag to their induction status and zone authorisations. Un-inducted or unauthorised entry to a restricted zone is detected the moment it happens, and the worker can be escorted to the induction centre before they reach the hazard. Contractor headcounts, time-on-site and zone access are all captured automatically, no clipboards, no guesswork at the gate. For chemical manufacturing & comah operators, this means on a COMAH site, a delayed or inaccurate muster is not an inconvenience, it is a regulatory and human failure. Paper roll-calls and radio round-robins are too slow when a release or fire is unfolding, and they leave no defensible record. The Salvus Network detects every worker's safety tag at muster points and gates to give marshals a live, auditable head count in seconds, so search effort is directed accurately and the incident record writes itself.
What you get
Contractor Management on a chemical manufacturing & comah site.
Induction verification
Safety tags carry induction status; un-inducted entry to restricted zones is flagged instantly.
Zone authorisation
Gate restricted zones to workers who hold the right local induction.
Contractor headcount
Live counts of contractors on site by company and zone.
Time-on-site records
Automatic in/out records for every contractor, ready for billing and audit.
Regulatory alignment
Evidence for the audit trail.
Supports COMAH 2015 Regulation 5 (major-accident prevention policy) and Regulation 7 (emergency planning), alongside DSEAR risk controls and HSG191 guidance on emergency response.
How we compare
Full coverage, not turnstiles.
| Capability | Manual roll-call | Turnstile RTLS | The Salvus Network |
|---|---|---|---|
| Real-time head count | |||
| No choke points / turnstiles | |||
| Auditable muster record | |||
| Zone-level awareness | |||
| Lone-worker welfare alerts | |||
| Live in the first meeting | |||
| UK data residency + Cyber Essentials |
Proof
Sites already accounted for.
Induction breaches caught at the gate, plant located in seconds.
“We stopped chasing paperwork and started managing the site in real time.”
Officers protected in the field and repairs evidenced.
“We protect the people who deliver safe homes, and we can prove the work was done.”
Frequently asked questions
Is Contractor Management suitable for chemical manufacturing & comah sites?+
Yes. The Salvus Network is a complete, off-the-shelf solution built for major-accident-hazard chemical environments. Safety Detection Points and safety tags give a live, auditable picture of where people were last detected, without turnstiles or manual sign-in.
How does Salvus support compliance for chemical manufacturing & comah operators?+
It produces a live, timestamped muster record and auditable access and time-on-site logs that evidence personnel accountability under COMAH 2015 Regulation 5 (major-accident prevention policy) and Regulation 7 (emergency planning), alongside DSEAR controls and HSG191 emergency-response guidance.
What does contractor management address on a chemical manufacturing & comah site?+
On a COMAH-regulated chemical site the priority is proving everyone is clear of a release or fire in seconds. The platform delivers a live SAFE / EVACUATING / MISSING muster, last-seen location for anyone still inside a hazard zone, and restricted-zone control around DSEAR and ATEX areas.
Can we see contractor management running before we commit?+
Yes, a guided live walk-through shows the platform in action, and you can see the operator console working in the first meeting.
Ready to account for every worker on your chemical manufacturing & comah site?
A guided live walk-through of what the platform can do.